Thankyou for purchasing our custom 3D print file packs.
FAQS.
Upon purchase you will be given a PDF file, Open this and click the link provided, It will take you straight to your files.
Our files are all stored on GOOGLE DRIVE and you will have Instant access once purchased.
The files are yours for life, You can download them all if you wish or just download as you go.
A lot of our files are stored as ZIP files which saves some space for us and you. You can open the zip files within your file explorer using the extract feature or as we suggest downloading a free unzip program like 7zip, it allows to do bulk unzipping at once. we are working hard to unzip all files for you to make it easier to navigate.
Depending on the files they will come in 2 different formats, STL and 3MF or both. STL files are a generic file that contain the model or models in non color form, ready for printing, 3MF files are files used with your slicer software that may contain specific information such as colors used, support settings, Infill settings and layer heights, these are very common with multi color 3d printing.
Our files will work with any 3D printer and any slicer software, we do highly recommend OrcaSlicer, BambuStudio, flashforgeOrca. cura slicer, most slicing software will work
Printing settings :
we highly recommend using at least 10 percent infill using gyroid, and at a minimum .20 layer height, for better results use a .16 layer height. If the model requires supports try and use tree supports as they are easier to remove and leave a cleaner look.
Vases : use vase mode or spiral mode for better printing of vases.
